Having problems with your 1996 Toyota Camry ?
1996 toyota camry i changed the battery connector both positive and negative, do i have to get my computer system reset in my car?
\015 I changed the battery connectors both positive and negative, but my car will **** while driving. it not backfire, my sparkplugs are fine but do i have to get my computer system reset in my car?\015
Repair Help & Product Troubleshooting for 1996 Toyota Camry
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
1996 toyota camry i changed the battery connector both positive and negative, do i have to get my computer system reset in my car?
... 1996 Toyota Camry
The car won't start every so often. I reset computer with mechanical and wait till next day for car to start. I think the dealership planted a bug in the computer system. The problem began after the dealer had replaced a bad catalytic converter. Since then the car won't start after so many starts. The next day it will start and the check engine light will be on. Again i reset computer by opening the door with the mechanical key. After three times the lite goes out. And then it seems like you get
... 2002 Mercedes-Benz E-Class
I have a toyota camry 2.2 GL, had a problem on the computer, do not get the computer to camry, we had to buy a Toyota Corolla, there is some compatibility issue with this system? something could go wrong? thank you very much
You cant use computers from diffrent makes and models ... 1995 Toyota Camry
My 2008 Toyota Camry Hybrid navigation system does not track my location. It may start correctly, but with a 5 mile drive it is off by .5 miles. My Toyota dealer does not seem to know what to do. It worked great until the built in CD player stoppede working and they replaced the entre unit including GPS system. Now it won't work at all. I believe the system may not be getting satellite updates as the car is driven and thus doesn't know where I am and what my direction is.
This same problem happened to me today. I just had the defective CD player replaced in my 2008 Hybrid Camry yesterday and now the nav system is tracking my car miles away from where I am. I haven't found out yet out to reset the nav system. I tried t ... 2008 Toyota Camry
NO SPARK I have a 1992 Toyota Camry LE. that is getting no spark. I had someone look at my car and try to fix it and they said they put in a new starter relay, new cap and rotor, the whole distributor, ignitor pack, and new used computer and the car is still not getting spark. They are telling me i need to replace my engine wiring harness. Any suggestions?
I do not think the wiring harness needs replacing, although it may be a bad connection somewhere in a car this age. See herehttp://www.turboninjas.com/camry/ig. ... 1992 Toyota Camry V6
In the last couple of weeks my 1997 Toyota Camry LE would not shift out of park (2 times). The shift lever will not depress and the key remains in the locked position even when pressing on the brake preventing the car from starting. The mechanic says it is the shift interlock. So far I've been able to mess with the keys and brake to get the ignition to release so I can start the car. What kind of problem is this and is there anything I can check before agreeing to get the service done.
Try putting your hand brake on first ,before putting the gear lever into park ... 1996 Toyota Camry
I replaced the dome light fuse in a 1993 Toyota Camry, and now the car's ignition is disabled, and I didn't get a remote when I purchased the car. So now, the lights are flashing, and the ignition is cutoff - can I bypass it? or do I have to go to a dealer and get a keyed remote to disable the factory security system and alarm?
... 1993 Toyota Camry V6
UNKNOWN PROBLEM I HAVE A 96 GRAND AM SE 3.1L I HAVE CHANGED THE FUEL PUMP FUEL PRESSURE REGULATOR CRANK POSITION SENSOR TRIED THE COMPUTER RESET BOUGHT A NEW THROTTLE POSITION SENSOR MAP SENSOR AND MASS AIR FLOW SENSOR AND IT MADE MY CAR RUN A COUPLE SECONDS LONGER BUT THE SECURITY LIGHT IS ON SO WHEN I CRANK MY CAR UP IT RUNS FOR ABOUT 12 SECONDS AND CUTS BACK OFF SO DO YOU THINK I SHOULD GO TO A SALVAGE YARD AND GO GET ANOTHER ECU OR WHAT SHOULD I DO
Have your ignition switch replaced this will fix the issue.very common! ... 1996 Pontiac Grand Am
My 1996 continental has been sitting for about a year and now wont start. How do I reset the computer system to get the electronic fuel pumps to working? We are obviously not getting fuel to the car
The fuel pump passed.It developed corrosion and went out.You may be able to revive it by having some one hit the gas tank as they crank the engine. ... 1996 Lincoln Continental
1996 Toyota Camry. Bought new battery months ago. Reset the battery after replacing. Friday, parked the car, came back put key in ignition to start. Lights started flashing, all electronics work, but the car will not start. Not even a click. I have already tried taking the battery out, putting it back in etc. The car was bought used and may have an aftermarket anti theft system.
I will assume you have a factory Anti-Theft system. Here is the rest procedure unlock the system which was triggered by the battery change and resultant loss of power. Do the reset exactly as written.\015\012\015\012\015\012Put the ... 1996 Toyota Camry
My alternator went bad on my 2000 hyundai elantra and left us stranded at a stoplight. We had to be pushed off of the road. I replaced the alternator with a brand new one and it hasn't been on the car for 2 weeks yet and my car did the same thing again. The alternator tested bad again. I don't know if there could be something wrong with the wiring system in this car or what but it's aggrevating. Also, I can't get the check engine light to go off either. I have reset the computer and it stays off
Quality of parts is always key. An electrical component can go bad 6 seconds after installation. These aftermarket rebuilds have tendency to fail prematurely. Unless there have been any aftermarket stereos, amps, wiring, etc., installed, highly unlik ... 2000 Hyundai Elantra
I have a 2005 Toyota Highlander, the VSC, ABS, Brake System Warning lights were on. also, the low tire pressure is blinking. I drove the car for just half a mile and the lights went off. The following day, those warning lights were on again. This time i removed momentarily the negative connection of the battery. I even checked the small vacuum lines at the air filter area. I started the car but still the same lights were on. Meanwhile, i have sent to shop to check the tire pressures and reset t
... 2005 Toyota Highlander
Hello Experts, 1999 Chrysler Sebring LXi v6 2.5L. Car had a hard time starting. It would turn over but not start. When it did start, it would run and idle fine for about 4 minutes and then die. I've recently replaced the fuel filter and crankshaft position sensor. Now the car starts up every time but is running very rough. I've taken it for a drive and no matter what speed I get up to, it never stops running rough? Does the computer need to be reset?
To reset the computer simply unplug the battery for about 30 minutes.\015\012\015\012However, you have a different problem I believe. you need to check your plugs and wires/coil packs. A fouled spark plug will cause rough running at any ... 1999 Chrysler Sebring
Removed Toyota Camry 1998 engine to work on it, then installed it, but car won't start. Everything is in place SURE OF IT!! There seems to be a problem with the computer or the alarm. In case it is the computer do I need to reset it? If it is the alarm how do i disconnect it?
Aftermarket alarms are always better when removed ... 1998 Toyota Camry
I can't get an inspection sticker for my car because it keeps failing inspection because the computer will not reset. Every time it does the same thing. When they test the OBDII Readiness it says the Catalyst, the Evap. System and the O2 Sensor are "Not Ready". There are no trouble codes. Everything else passes. I've done a few things that they said might reset it which were keeping the gas between half a tank and a quarter of a tank for about three days and driving 70 -75 MPH for about 15 minut
Every time you reset the light or disconnect the battery it completely resets the system and it has to go through EVERY test again. The O2, EVAP, and Cat tests are generally the LAST THREE tests that are tested. You're not doing yourself any favors ... 2006 Mazda 6
Steering wheel was turned in process to locate battery prior to knowing that positive and negative prongs where located under the hood for more convient jump start. after recieving an intional charge and attempting to start car, the ignition refused to turn forward and let the car start. however, the key was able to be turned backwards, so that the stero and luxurie lights would come on. so we are stumped as to if whether or not we need to reset the computer or if we are facing a differnt pro
Pull the wheel hard in the direction you had turned it when it locked, that should free the lock mechanism enough to turn the key. What's happened is that the wheel trying to go back to center had jammed the locking mechanism. Remember to turn the ... 2001 Chrysler Concorde
1989 Toyota Cressida: Driver side shoulder strap stopped working in the down position-passenger side works great. Was told the fix was an automatic seat belt module. Local Toyota dealer parts dept. can't find it listed or where it might be located. They have the motor and computer listed. Is there a module or fuse and where located in car? Can the passenger side module be used to get the driver's side up? Can shoulder strap be manually disconnected? If yes, how?
... 1989 Toyota Cressida
I have a 1998 toyota camry that i dont drive very often the battery went dead and for some reason the security system will not let me start the car .I need to know how to reset the system.
Hi.try the following procedure:Disconnect battery.Put the key into ignition.Turn the key to the "on" position.Connect the battery.Remove the key from ignition.Get out of the car, close door, and ... Toyota Camry
Overheating 2006 chevy cobalt thats the first problem. car is overheatinf getting up to 215, i have changed the thermastate, thremastate sensor, swithced around the silonoids and flushed the radiator not to mention un hooking the negative battery cable to reset the computer and still overheating all that is left is the water pump but it seems to get coolant.
Yes I have 2005 Chey cobalt it's over heating we check thermastate it's working but it's still overheating it's seem everything is floating . We think it's the water pump ... 2006 Chevrolet Cobalt
Hello I have a 1997 toyota Camry with 182000 miles on it. When I started my car my check engine ligth stay on. I went to Auto Zone to get it troubleshooting and a code P0450 came up it also states evaporative emission control system pressure sensor/switch and probable cause a Faulty pump module. Do I just get the pump module replace or could it be something else?
Dear corliss_rich,\012I just googled po450 code and found the there was a settlement on Toyota Camrys from 96-01 involving Evaporative Emmissions Control system sensor. Check web page. Toyota may fix for free. I have same problem on my camry. ... 1997 Toyota Camry
I have a 99 alero. The computer by passenger floor was changed. The computer that replaced it has the same part number as the old one. I turned the key on for 10 minutes and waited to reset the security system. Shut the key off and then started the car. It started. Waited 5 minutes. Put the car in gear and then back to park and shut it off. Tried to start the car again and it wont start and the security system light is back on. Is there a procedure to program the replacement computer for the car
MOST THE LATE MODEL CARS OBD 2 PCM CONTROL FROM 1996 - 2011 WHEN EVER YOU REPLACE THE PCM BEST FOR DEALERSHIP TO FIX BECAUSE THE PCM - CRANKSHAFT SENSOR - ANTI THEFT SYSTEM HAS TO BE REPROGRAMMED. ... 1999 Oldsmobile Alero
I cannot get my 1997 Camry security system to de-activate. The engine cut off is on and will not start. I have followed the instructions to reset, but no luck. The all started after I replaced the starter on the car and disconnected the battery.
Try disconnecting the battery again and leave it unplugged for atleast 15 minutes. ... 1997 Toyota Camry
1994 Camaro Z28 Radiator Fans wont come on once car gets hot have checked the fans, they work fine have checked the relays (OK) in checking the distribution block terminal 5 for each relay (#2 & #3) do not energize when the ignition is in the on position Check engine light is on, put code key in odb ! terminal light goes out and does not flash any codes diconnected the battery and the computer does not reset light is still on I am at my witts end, please someone tell me there is an inline fu
Http://shbox.com/1/4th_gen_tech2.html#cooling\015\012\015\012this should help ... 1994 Chevrolet Camaro
My 96 jettas security system won't disable I've removed the negative cable and let it reset but as soon as it's back on and I turn the key in the ignition it goes off so I can't start the car and I have to pull the cable again I've been doing this all night in a bar parking lot in the rain trying to go home and I've also tried turning the key in the unlock position in door and I just don't know what to do
I made a video on this when I fixed mine http://www.youtube.com/watch?v=guJ8d5My4gQ ... 1996 Volkswagen Jetta
I have 2007 toyota camry se 2.4.i just got about 69000mile on it n my check engine light came on.took it to auto autozone n its say my car was running rich.its still run the same but sometime my rpm keep move up n down like its gonna die on me.i wash my intake box during the summer n i forgot to take mass sensor out.if it get wet well it cause it later not to work unproperly?but some maf sensor cleaner reset it than drive for while than check engine came back on.
The MAF sensor is pretty delicate. Can you tell us exactly what trouble code you are getting? ... 2007 Toyota Camry