Having problems with your 1999 Toyota Camry Solara ?

I have a 1999 Solara with a code of P0440. I have about 130K miles on the car. The car runs beautifully with no major issues. So my question is what is the probability that I may have to change out the solenoid. What is this rated if I were to take it in and have done.I am debating the cost of having it done with the savings of doing it myself however it will take me longer since I don't have the equipment a mechanic has. Is it worthwhile to do myself anyway?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Po440 is the evaporator what is happening is I found
\012when you over fill your car Thepumps it being over filled
\012the gas runs down the return
\012line at the neck and fills up one of the valves on the canister
\012if you take the canister off get the part number from the valve
\012it schould have gas in it. Replace. It otherwise replace the who
\012e thing evap with the valves and stopover filling am I right
\012please reply I can read minds let 'me know thank you jk
I have a 1999 Camry with this code. Apparently there are a few things this code could indicate. Ultimately, in my car, changing the charcoal canister fixed it. It could also indicate a lift sensor needs or EGR valve needs replacing. As the charcoal canister is basically an "air filter" that doesn't affect how the car runs, I waited until before my safety inspection, as the check engine light wouldn't go off until the problem was fixed!
Repair Help & Product Troubleshooting for 1999 Toyota Camry Solara

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 1999 Solara with a code of P0440. I have about 130K miles on the car. The car runs beautifully with no major issues. So my question is what is the probability that I may have to change out the solenoid. What is this rated if I were to take it in and have done.I am debating the cost of having it done with the savings of doing it myself however it will take me longer since I don't have the equipment a mechanic has. Is it worthwhile to do myself anyway?


Po440 is the evaporator what is happening is I found\012when you over fill your car Thepumps it being over filled\012the gas runs down the return \012line at the neck and fills up one of the valves on the canister \012if you take t ... 1999 Toyota Camry Solara

Golf e mk4 is noisey sounds like tappets, but various mechanics reckon that it is hydraulic cylinder shims? car has done 66k and not been looked after, just had it serviced and still noisey. it needs a timing belt so is it worth having it stripped down and re-done while timing belt is off, been told its expensive labour costs as it will take ages. should i have it done properly and peace of mind? will it cure the tapping noise? is it worth having the big job done?


BAD LIFTERS WILL MAKE A NOISE.IF VALVE LIFTERS AND LOWER SPRING SEALS BEEN REPLACED AND LIFTERS STILL NOISEY.EITHER ENGINE OIL TOO THICK OR ENGINE NEED OIL CHANGE + FILTER CHANGE.DIRTY OIL CAUSE LIFTER NOISE OR OIL PASSAGES IN THE CYLINDER HEAD STOPP ... Volkswagen Golf

2002 Lancer has a bad front wheel bearing. Can this be done at home and if so what tools are needed? If we take it to a garage what is an est. cost and how long does it normally take. Thanks for your help!


It will probably take a press to replace the bearing. You have two inexpensive options. Buy a used bearing hub with a good bearing in it and replace assembling yourself in the garage. Take the bearing holder off the car and take just the bearing hub ... 2003 Mitsubishi Lancer

My 93 saturn has this sputer and die problem when you drive on freeway get off stop the rpms drop try to save it and it dies but starts up again i have asked this before but now we know its after freeway use this is what i have done so far all new plugs wires coil packs fuel filter fuel pump cleaned out gas tank i bought a code reader it comes up as fault 45 it says rich exhaust indicated dont know what that means or if its relted to this sputer and die on take off please help


It is most likely the fuel pressure regulator,or a restricted return line,from the fuel pressure regulator to the fuel tank,the fuel is being forced into the intake,cause it can not go back to the tank. ... 1993 Saturn SL

I just want to know where I can take my 2004 Kia Spectra/4 DR (2.0 engine) to have an alternator replaced without having to pay more than double the cost of the alternator itself as opposed to the online prices. Don't have a reputable mechanic but would like to have it done professionally . Chicago South


Try this mom and pop auto repair shop in South Chicago. There rates are very reasonable vs. taking your car to the Kia dealer\015\012\015\012 ... 2004 Kia Spectra

Im having my tranny rebuilt on a 1997 ford ranger xlt. The Drive went on it, Im down to the lower gears of 1 &2 and reverse is very hesitant. the mechanic is doing a complete overhaul. Was this the only solution? And what are my chances of getting a good to great working truck when he's done? (take into acct he's a "mister transmission" specialist) Also any feedback on cost would be great!? I also have my running lights not working. (tail lights) brakes and signals work but not the tail lights w


Chris\015\012\015\012 Not so much Ford Trans, but rather Ranger Trans are are just a poor fit. Everything about them is just ify. I agrain reman is the better way to go, just for the long term money and expenses.\015\012\015\ ... 1997 Ford Ranger SuperCab

Do you have to take the over head cams out when doing both head gaskets on a toyota 1996 vienta camry v6 3 litre? i just brought one and two wks later i was told id blown or creaked a head. could you help me ,I wish to do it myself as was quoted 2000 for the work.I have done older cars with a straight forward motor,these seem very tight and packed in. I have taken the inlet manifold and rocket covers off. What would normally be the cost at cheapest to fix this prob plus should I get sum speciali


YOU NEED TORQUE WRENCH MOST OF ALL.YES YOU HAVE TO REMOVE CAMSHAFTS IN ORDER TO GET TO THE HEAD BOLTS.YOU WILL NEED TO GO TO ANY AUTO PARTS STORES BUY A CHILTON OR HAYNES MANUAL.BECAUSE TOYOTA HEAD BOLTS NEED TO BE LOOSEN IN SEQUENCE AND TIGHTEN TO ... 1996 Toyota Camry

Coolant has been slowly leaking for extended period of time. Mechanic at NTB suggested I take it to the dealer, as he suspects it to be the freeze plug. Want to know how much this may cost me, and can it only be done a dealer?


WELL IF IT IS A CORE PLUG (SAME AS WHAT SOME CALL A FREEZE PLUG) AND IT IS BEHIND THE TRANSMISSION THEN U ARE LOOKING AT ABOUT $500 TO FIX, THE REASON IS THE TRANSMISSION MUST BE REMOVED TO ACCESS THE LEAKING CORE PLUG, IF THE CORE PLUG OR PLUGS ARE ... 1997 Buick Skylark

My 2006 Chevy Impala SS gave me a blinking check engine light while I was driving. It started to feel like misfiring in the spark plugs or the timing. If it's just plugs and wires I can have that done for a decent price but if it's more than that, then I need to take it to a mechanic and I know it will cost me a bucnh.


Have the car scanned for trouble codes. Many parts stores, such as autozone and advance will do free scan. ... 2006 Chevrolet Impala

Best said if I steal the words from another Pontiac Grand Prix owner..."For the love of God and everything holy, where do I put in power steering fluid?" I 've been told by the dealer that it would cost a whooping $217 to put in $2 worth of power steering fluid if I take the car back to the dealer to do it. I'd like to put in the power steering fluid myself and save $215, but I can't find the HOLE!


You are going to need a really long funnel for this. The reservoir is below the alternator near the firewall. Probably need a flashlight to find it. ... 2007 Pontiac Grand Prix GXP Sedan

Without warning I went out to start my Jeep and heard a loud ticking noise. My Brother-in-Law checked it out and said it would need a valve job but then the valve freed up and went quite again (no ticking). Five minutes later it got stuck again. Since I'm on disability income I just can't have it towed in to a shop without first know the average cost of a valve job or are there any additives that might help to free up the valve until I can save up some more money to have the work done? I still o


Add a quart of engine flush to your oil and drive for about 20 miles then change the oil and add an additive for "sticky valves" Any auto store ( Pep Boys. AutoZone NAPA) will have these items ... 2002 Jeep Grand Cherokee

1999 ford expedition - needs a timing belt, but mechanics keep telling me that it has a chain and not a belt. I just need it done and want to know stuff like - how much time it takes, how much it cost's, is it a belt or chain? etc.


No engine used in the Expedition has a timing belt, they all have timing chains, timing chains never have to be replaced unless they fail or the engine is being rebuilt. On this engine replacing the timing chains for each of the two camshafts (2) cos ... 1999 Ford Expedition

I want to get service for a AWD 2005 GRD CHK LTD What are the basics that I should have done for 45000. I have had no dealer work after 25000. Dealer went out of buisness. I was always taking their advice on what was needed. I get oil changes every 4000 miles. Drivers are both over 60 so no hard driving. Cost is always important. Should we go only with dealer?


You can go any place like jiffy lube for your Oil and filter change every 4,000 miles or 6 month's which ever comes first. The air filter should be replaced every 25,000 miles and PVC valve or once a year. The transmission, transfe ... 2005 Jeep Grand Cherokee

Ok.. i just bought a 2001 z3.Whhether this was a good dicision is debateable. The BMW dealer charges 135.00 for an oil change. Is this not robbery or do I need to learn some things. Also.. what services need to be done and how can I learn to take care of tthis car? Thanks for putting up with the ignorant.


When you consider that dealerships charge $90.00 plus an hour for labor and suggested retail for the filter is probably close to $20.00 and oil is around $3.00 a quart, even at Walmart, then the price doesn't seem out of line. Expensive cars require ... 2001 BMW Z3

I have a 1999 Jeep GC. To save time, I will tell you the problem and then everything I have done. Monday, My wife takes the Jeep to work. Comes home. No Issues. Monday night approx 10 minutes after she gets home, we get in the Jeep to run to town. Turned over one time slowly but did not start. On the next attempt, it didn't even turn over. Just clicking relays. I removed battery. Had tested. Good. I replaced the battery terminals. I removed starter. Had tested. Good. I replaced the starter relay


I just went through the same thing with my 1998jgc.you may want to start with the crank positioning sensor.i had to change the crank sensor and cam sensor distributer cap and rotor button ... 1999 Jeep Grand Cherokee

Please help! I have a 2007 Audi A4. My check engine came on last month, so I took it to a shop for a free diagnostic check (where they plug that tool into the dash). They told me the car was misfiring on all 4 cylenders and a tune up would fix the car. I called a mechanic and he told me worst case would cost 600 bucks! Im strapped for cash so I've had to sAve & will finally have the cash on the first. But now I am having BIGGER problems!!! The car will not pick up speed! It takes forever for th


... Cars & Trucks

Scooter Thanks for getting back so quick. The company will send a replacement part for free. But I will probably have to get someone to put it on. I going to attempt to take off the outer "plate" just to see if I can see anything. It's just a few bolts. Then maybe if it is right in front of me I can get a neighbor to help with it.Ironic, trying to save money is actually costing me more money YIKES!! Thanks again and have a great day.


Mj, check the manufacturer's web site, they may have diagrams, or how to replace the belt. I wouldn't think it would be real difficult, but of course if you don't have the tools, it can be 'interesting'. Hope u have some helpful neighbors--good luck ... 2007 Suzuki XL-7

How long does it take for the computer on a 2000 pontiac grand am to re-set someone please help I have had work done on my car the codes cleared and I still cant get the echeck done thanks for any hel


Hi Lisa, The fault codes which are stored and displayed from the management system in the vehicle indicate defects which need attending to. Once the defects have been rectified the codes should be erased via the scanner and the vehicle should be deri ... 2000 Pontiac Grand Prix

Od flashing i was driving and my od started flashing and i had a new transmission put in about 3 yrs ago and had a flush also done about 6 month ago and alway do oil changes is there another option besides taking it to a mechanic. How much can i drive it can i at east take it 4 or 5 before i take it to the mechanic


My brother adj the battery and it stop flasing when he turn in the car thanks ... 1999 Mazda 626

Rough Idle Have rough idle and/or 'hunting' idle speed (up & down & up & down) on 1994 Mazda Protege automatic 1.8 litre double overhead cam engine. I'm considering removing the Idle Air Contul unit, taking it apart, cleaning it, then re-installing it, because new/rebuilt units are like $300+. Can anyone tell me if this has been done, and if yes, how hard is it, how long does it take, what do I use for cleaner [fluid?], and what special steps should I take in cleaning the inards and rebuilding t


I would crank the car when it starts reving up and down take a tool of your choice depending on the position of AIC and while acting up firmly tap on it for a few seconds and while you're doing that listen for the enging to change what it's doing.som ... 1994 Mazda Protege

I have a 1994 960 Volvo. the problem I am having is only on taking off after I've come to a complete stop. This is an all the time event and as I stated, everytime I take off, what I hear form underneath sound to be, as I can best describe it, is a drum roll. It only happens on take off and I am wondering if this is a seious issue that is costly to repair. My mileage is only 115,000 and my vehicle was a one owner, given to me by my uncle who used it for travelling only. I wanted to get this


Hi E,I think what you're experiencing is a clutch shudder. This occurs with manual transmissions and not auto. If the car jumps and shakes during take of, sometimes with a clattering noise, (if you have a manual box) the gear box will have to b ... 1995 Volvo 960

Recently bought a range rover 4.2 automatic 53 year only done 51000 miles broke down on monday. auto gear box has gone has any body come across this before as landrover tell me it will cost £3000 for gear box then labour and vat on top warranty only goes up to £3000 we will have to pay vat plus labour costs can any body tell me if this is the true cost of gear box for 4.2 auto gear box.And should it have gone with so few miles.


I'm not familiar with the conversion of dollars to your currency however if yo can help me with that i will gladly research the problem for you. as far as any part of any vehicle, poor maintenance will almost always result in premature wear and break ... Land Rover Range Rover

Hi, This past weekend the temperature must have gotten so hot that it cracked my dashboard in 2 places. Both cracks are on the defroster vent. I have read that it is easiest to replace the dashboard rather than fix it, but I do not believe this would be an easy task or very cost effective with my car. In your professional opinion, how much does this fixture usually cost or should cost? Would it be better to provide the part myself and just pay for the labor? Should I take to small shop or would


The dashoboard assembly can be very expensive, I would look for the part via a junkyard, a car can be in a junkyard and still have a decent dash. The labor for this job is ussually between 7 to 10 hours charged to you, at an average rate of $65 to $9 ... 2004 Pontiac Grand Am

I need to know how to change the spark plugs on a 2005 Chevy Impala with a 3.4 liter motor. I'm just not sure if there is any tricks I need to know. Do I take off the intake or just reach around the back to take them out? And is there anything else I should know? And please don't tell me to take it in and have it done because if I could afford it I would just do it. Thanks!


No tricks but if you cant get your hand on the back of the engine to replace the plugs you may have to do it from under neath the car other than that you should be ok id suggest changing them out 1 at a time so as to keep your wires in the proper ord ... 2005 Chevrolet Impala

Had major tune-up and tranny service done now it's hesitating going up hills and the engine light came on blinking and then went off but it loses power going up inclines edit save Saving... Last step


Sounds like a bad plug wire or coil. ... 2003 Chevrolet Impala
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0867 seconds