Having problems with your 2007 Suzuki XL-7 ?

I need to remove the interior door panel on the driver door to install the external door handle that is broken. I have to keep going through the back door to get into the car and so I am tired and needs to get it fix.

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

CHECK THE DOOR OVER VERY CAREFUL FOR PHILLIPS SCREWS YOU WILL ALSO NEED THE TOOL FOR POPPING THE PLASTIC PEGS AROUND THE DOOR YOU CAN FIND IT AT AUTO ZONE THAY MIGHT EVEN LET YOU BARROW IT TO GET THE PANEL OFF IT CAN BE REINSTALLED WITHOUT IT THE TOOL IS A FLAT TOOL WITH A CUTOUT IN THE MIDDLE IF YOU HAVE WINDOW CRANKS THE SAME TOOL WILL REMOVE THOSE TO TAKE YOUR TIME SLOW AND STEDY HOPE THIS HELPS GOOD LUCK BOB
Repair Help & Product Troubleshooting for 2007 Suzuki XL-7

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to remove the interior door panel on the driver door to install the external door handle that is broken. I have to keep going through the back door to get into the car and so I am tired and needs to get it fix.


CHECK THE DOOR OVER VERY CAREFUL FOR PHILLIPS SCREWS YOU WILL ALSO NEED THE TOOL FOR POPPING THE PLASTIC PEGS AROUND THE DOOR YOU CAN FIND IT AT AUTO ZONE THAY MIGHT EVEN LET YOU BARROW IT TO GET TH ... 2007 Suzuki XL-7

My 2001 Monte Carlo with 115k on odometer has an electrical problem... first off my air fan speed control only works on number 5, second, as I am driving the vehicle the door ajar light will come on and the dome lights come on and the doors lock and unlock automatically. It is driving me nuts and I need to fix it! I also get out of the car thinking the dome lights will go off after I lock it and walk away... when I come back they are still on and never shut off! Please help me!!!


... 2001 Chevrolet Monte Carlo

I bought a car from a dealer, I am in Albany, NY. He said he has to get ceitified check or cash. I did. He asked me to signed a contract, which stated: he only garanteed on engine and transmision withing 30 days, hand writing. At the same time, he promomissed me he will fix the back of the car (he need to order it), fix the back windshield blade, fix the car vibration problem. It has been about 3 weeks, he finally asked me to go to a garage and check the problem with vibrating, after my insistan


The problem with your situation is this. The repairs mentioned were part of a "verbal" agreement. NY state lemon laws only mention warranty issues, and warrantied parts. Here is some info I found about the laws in your area. ... 2001 Subaru Legacy

At first, the light to let me know about the air in the tires turned on, and after a couple od days I took it to the car dealer where I bought it..The tires were check and was told that the light will turn off after a while.7 days later, I got a flat tire,the back tire on the passenger side, so we took the car to get the tire fixed, and 3 days later onother light went on, I think TPMS,well, we took the car to the dealer, and now they told us the car needs sensors, and we have to paid for it,caus


Contact the place where the tire was changed and let them know that they damaged the TPMS sensors. If they have a grain of integrity, they'll make it right. ... 2008 Hyundai Sonata

No acceleration We have had the same issues with glow plugs. However, these have been fixed time and time again. Now we cannot get the car to go over forty. It has no acceleration. I don't believe that it is the injection pump, not getting, heavy smoke. Need some help great car and need to get it back up and running.


Ok, have you checked all the turbo hoses are connected and have no splits, if all is ok, and the clutch is not slipping it is most likely the air mass sensor. do not buy a pattern part they fail all too quickly, buy a genuine vw part normally approx ... 1998 Volkswagen Jetta

In my 96 mercury villager the auto locks r going crazy. the driver door wont stop locking on me. i would try to manually hold the unlock botton in & when i let go it just locks up the whole van...all the doors. i can manually unlock the sliding door & pasenger door & have to get out that way. how do i fix the hauted door lockes...HELP i need to be able to open my back door bc im moving this weekend. & i cant manually unlock that one. i dont have keys to the doors when got the van, just the ignit


Http://autos.groups.yahoo.com/group/villagerquest/go here and read the files on this issue.You have water in the door lock actuator connector or you have a wire shorting out on the sharp inner door panel.Also, you can cut a wire that will stop this c ... 1996 Mercury Villager

How do you get the door panel off a 2006 Volkswagen Passat? I need to fix the wires that go from the panel out the door connecting to the car. Do I need a special tool. I got what you would think was the panel off. However there is another piece that wont come off and i can't get to the wires.


To remove the trim panel are as follows: where the window switch plate is you will need to lift that up (try to get it from the bottom ) using a hard nylon tool because you don't want to damage it, there are 3 Phillips screw behind that ... 2007 Volkswagen Passat 2.0T

We have a 1998 vw beetle that we just had in because check engine light was on. Dealer said we needed new battery and they also put in new fuse panel and rewired everything to the panel. They said they checked it after those things were fixed and everything was OK. We also had a car starter that was installed by a previous owner taken out. We get the car home,and the next day the check engine light was back on, and we can not get in the car witout the alarm going off. And it also goes off when w


You need to go to Autozone or Advance Auto and borrow their DTC Scan tool and hook up to your car and send me the code or google it. That way it is easier to identify it. ... 1998 Volkswagen Beetle

Hi i had my like for about two months now and its getting alot of proplems like. -battery light keeps going on and off -car tire feels like about to fly off -my indash system will turn off but car will still run -car door are coming unglue and hard to fix them is it worth fixing up?


Really need more facts like mileage, extra maintenence done, body problems and so on.\015\012\015\012Here are some low to no cost solutions. Your Battery light- take the car to Autozone or Oreillys or similar and have them do a free scan ... 1999 Lincoln Town Car

1991 pathfinder the control bar from the lock barrel has disconnected from the locking mechanism there are plastic parts on that control bar one is a little yellow thing that needs to fit to a hole in a metal piece on the locking mechanism then a bigger white plastic cover has to go over it, I have been unable to get this to go back into place please help me fix my door locks this has happend to both locks on my front doors


... 1991 Nissan Pathfinder

93 nissan maxima...keypad locks are on the outside ( i don't know the combo). When I locked the car and shut the door, the alarm started going off, the door key wouldn't work (to get me in the car) and I had to have a wrecker haul it back home. What happened and what do I do to fix it?


Quit the glovebox right there is a gold box they have a number to reset the code of the key pad the vin number put it a nd the you hear a sound in that moment you can change your new code of 4 numbers. press the letter c and then your code and then u ... 1995 Nissan Maxima

I got the front tires of my 2009 kia rio changed and now the tpms and pressure lights are on. How do I get them to turn off? My mechanic even changed the little pressure sensors on the tires thinking that might help, but it didn't. I would like to not have to go to a Kia dealership to get this fixed. I am trying to sell the car and really need those lights OFF!!


YOU NEED TO TAKE IT TO THE DEALER AND HAVE THEM REPROGRAMMED . ALSO SOMETIMES WHEN AFTERMARKET SHOPS REPLACE TIRES THEY SOMETIMES BREAK THE SENSOR THEMSELVES . I WOULD DEFINITLY HAVE KIA LOOK AT IT AND MAKE SURE YOU DO NOT HAVE A BROKEN SENSOR ... Kia Rio

I have a 2002 buick Le Sabre that pumps out hot air on the driver side and cold air on the passenger side. I took it to a repair shop and he said they had to go in the "back door" way and found 3 codes that could possibly show 2 different problems. One of the fixes he said would take a $600 part and the other would take a $300 part. He didn't want to start replacing parts unless he knew exactly which one it would be. I needed the car back and told him I would have to bring it back at a later dat


Controll head if it has the split controll is common failure ... 2002 Buick LeSabre

Plumber no work at present need car fixed doent my self not a nut job started life as motor mechanic got jag 2.1 02 plate swaped all discs no problem cant get back pistons to go back i think the divice at the back of unit is stopping me dont know how to let adjuster off


Easy mate ,another good man whos left the trade disgruntled ,you get covered in oil and grease and socially outcast because of it ,anyway get a G clamp and apply a slight pressure and with a nice pair of snap on water pump pliers wind the pistons in, ... Jaguar X-Type

My door is jammed off alignment and will not shut how do i fix it I had driver's door open abd was "rolling a trash container...thought I put car in park and strarted to get out....jeep was going back on to trash container and jammed the door...it's jammed against front panel and will not shut....lines up below the hinge....


A body shop will certanily fix your problem. If you're a backyard mechanic though... get a pry bar in the jamb on the bottom half and pry the door out... if the hinge is snapped... get a welder and weld the hinge back on... there should be an imprin ... 1995 Jeep Grand Cherokee

How do you change a tire on a honda crv? I need to get the tire off the back door and change the driver side front tire. Where does the jack go?


The owners manual shows where to put the jack. I no manual sometimes there are illustrations where the jack is stored in its compartment. First loosen the lug nuts before you jack up the vehicle, prevents the tire from turning. After jacking up the ... 2004 Honda CR-V

My car wont start,you turn the key , and sounds like it's going to start but it just wont' i already take to the mechanic he had the car for about 2 months i get the car back ; he said it was fix and now it's doing the same thing; i really need same help;


FIRST GET A SPARK TESTER TO SEE IF YOU ARE GETTING SPARK AT SPARK PLUGS.IF NOT CHECK IGNITION MODULE FUSE.IF FUSE GOOD HAVE CAR HOOK UP TO SCANNER LOOK FOR IGNITION MODULE FAULT CRANKSHAFT SENSOR FAULT AND PCM FAULT.IF ALL LOOK GOOD SO FAR.CHECK TO ... 1999 Oldsmobile Alero

I have a 1997 Dodge Stratus 2.4 4 door that i just bought about 2 months ago. When i bought it the car ran fine but needed a bit of fixing mainly the manifold, I had this replaced and when i got the car back it started to spit and sputter up a hill and black smoke came from the back end. I then took it back and fond out my car needed a new converter so i had it fixed, but yet i am having the same problem. I then took it back and had the spark plugs redone and the car ran a little better but stil


I hate to be a **** and say this, but it's a Dodge. I had this same exact car, same year that you had for give years, and I hated it more than any vehicle I have ever owned. I don't know how any of them still exist. I'm sorry you're having these i ... 1997 Dodge Stratus

I need to get my passenger car door fixed very quickly. The door was slammed and now it will not open from the inside, but will open from the outside. It is a 2001 PT cruiser. What will it cost me to get it fix and how long.Is is something I can fix myself. Can slamming a car door mess something up inside your door?


With a little dedication, about 3-5 hours for a first time you can fix it yourselfhowever, if you are a little nervous about taring about your car, take in to almost any shop and it shouldn't cost you more than $250 with parts and labor ... Chrysler PT Cruiser

2002 eclipse spyder heater was blowing cold on driver's side, hot on passenger's. Mechanic "fixed" it so it would blow same temp on both sides--unfortunately that would be COLD. Obviously, I don't want to go back and have them fix it again. Where is the core in this car? I can't seem to get 2 diagrams that show the same placement--or the same part. 3.0 6L model.Thermostat has been replaced, system has been flushed, don't notice any leaks, but do need to add about a pint of coolant to the ove


... 2002 Mitsubishi Eclipse Spyder

I took the car for a knock sensor code and oil pan gasket and valve cover gasket fix. i picked up the car and drove, suddenly when accelarating i hear noise in the engine, its like every time i accelarate the noise gets louder, like a its using too much power and wont accelarate the way it needs to. and it will slow me down, i have to press more harder and it will move and the sound would go and come back .. there is also like ticking sounds and stuff while idle. they put the wire straight


Strongly suspect that someone forgot to put oil in your car when they were finished.\015\012\015\012This car may be done for. ... 1996 Toyota Tercel

While driving my Beetle. I heard a ticking sound, I needed an oil change, but this is what happened.........I turned the key off and then turned the car back on in the same night. The next morning it did not start at all. Could it be my timing belt that broke or could it be my fuel pump. I am trying to see which way to go to get my car fixed. Can you help?


Without being there I can only surmise. The timing belt is supposed to be good for 100,000 miles, but many fail long before that.When they fail, expensive damage occurs. If a 1.8T or TDi diesel engine, then expect over $3000.00 for repair ... 2001 Volkswagen Beetle

1998 BUICK REGAL GS TURBO ENGINE...WENT TO START THE CAR TODAY - ITS NOT STARTING - KEY IS STUCK IN IGNITION - DONT KNOW WHY - ANYTHING ELECTRICAL OR BATTERY IS NOT WORKING...LIGHTS NOT GOING ON - DOOR LOCKS WONT LOCK ETC...I'M SO SAD - I NEED THIS CAR TO HUSTLE KIDS BACK AND FORTH TO SCHOOL AND GET TO WORK ...WHATS WRONG WITH IT?


... 1998 Buick Regal

I have a 2002 buick LeSabre that pumps out hot air on the driver side and cold air on the passenger side. This has dual control. I took it to a repair shop and he said they had to go in the "back door" way and found 3 codes that could possibly show 2 different problems. One of the fixes he said would take a $600 part and the other would take a $300 part. He didn't want to start replacing parts unless he knew exactly which one it would be. I needed the car back and told him I would have to bring


Threr are only two things that I can think of that would be the problem, 1st is the a/c control module 2nd would be the plenum door motor. The module can usually be checked and operated with the right scanner. this would also tell you which door is ... 2002 Buick LeSabre

I was just wanting to know what the ignition switch does and controls and how much it will cost to have it fixed? My girlfriends car needs a lot of work. The gas gauge doesn't work, the car dies in the middle of the road at times, sometimes the car has a problem starting, the tie rod is wore out, and needs a hub-assembly. Also, the motor mount needs to be replaced. I was wondering how much would all this cost and where would I get the parts and where would I need to go and have it all fixed.


These cars came with computer brains when they start going out all kinds of things start going wrong your best bet is to have it put on a diagnostic machine see where to go from there weigh the options might be cheaper to get another car ... Oldsmobile Intrigue
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.7133 seconds