Having problems with your 1986 Oldsmobile Cutlass Supreme ?
Turning signals dont blink
\015 All lights are working. when i hit the switch left or right the bulbs just get bright, but dont blink. when head lights or on and i hit the switch. which ever side i hit. the front side light gos out. also if my foot is on the brake and i hit the switch which ever side the brake light flicker, but dont blink. there also isnt any ticking sound. the arrow just stays on\015
Problem is the Turn Signal "FLASHER" unit, 1.Turn on Emergency FLASHERS 2. Go under Dash while they are on Listen -for Clicking sound then feel for it 3. Should Be a Silver Round Unit About as Big IN ROUND as Half dollar coin 4. ok now Look Around for the SAME EXACT Thing Clipped onto Something Under dash At Driver side Usually Between Steering wheel and Center HUMP in Floor, 5. once you find it Take OUT the first One you Found Emergency FLASHER) and 6. Put it In Place of Turn Signal Flasher, 7. Turn off Emergency Flashers- Turn Key in "ON" Position but don't start then Try Turn Signals. Yaaaa !!!! they work ?? LoL hopefully this Does the trick, if they work Buy new one and Replace Always Use NEW For TURN Signals as they are used Much More than Emergency Flashers. Hope this is Good Instructions For you and Helps you Solve The Problem, Please DONT Forget to RATE ME Thank you [email protected]
First off, sounds like a bad ground on your lights at the socket. Can tell you more if you go premium. If this is any help, please post as helpful. I was a mobile automotive tech for a while.
Repair Help & Product Troubleshooting for 1986 Oldsmobile Cutlass Supreme
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.