Having problems with your 1992 Chrysler Lebaron ?

How to replace Head light & running light switch

Posted / edited by AnonymousUser on : 10-12-2018

Answers :

Remove the 4 bolts that hold the headlight assembly into the chassis frame.\012
\012For example, to remove the left front headlight;\012
\012It takes a 9006 low beam bulb, OEM is 51 watts\012If you buy a halogen upgrade, it will be a 55 watt bulb\012I don't know if you can put a super xenon bulb in there, it may harm the harness, I don't know so don't rely on me for that...\012
\012Lift the hood\012Get a socket head wrench and some SAE (standard) sockets.\012Find the socket that fits the bolt head just above the headlight.\012I think it is a 3/8's or slightly larger.\012
\012There are 4 bolts screwed through the frame into the top of the headlamp assembly.\012The bolts on each end of the headlight are longer and go all the way through the assembly to align it properly.\012
\012Lay each bolt out, on the ground in the order you removed them.\012The middle two bolts are short, maybe 1 " and the ends are closer to 3.5" long.\012
\012Once the bolts are out, slide the headlight assembly forward.\012There are two bulbs, a high and low beam. The low beam bulb is to the outside of the car, or drivers side on the left, farthest to the passenger side on the right.\012
\012Most of the time the low beam will burn out since it's used 90% of the time.\012
\012The bulb has a right angle fitting with a wiring harness attached.\012With your hand or a channel lock pair of pliers, gradually rotate the light bulb base counter clockwise until the unit is loose in the socket holder.\012
\012Disconnect the bulb from the wiring harness and replace it with the new bulb.\012
\012Reverse the process and turn on the headlights to check you have the \012bulb harness properly attached before finishing up the reassembly of the\012 4 bolts.\012
\012Your bulb alignment with the ground should not have changed from this work.\012Have fun...not difficult.\012Takes about 10 minutes per bulb.


Read more: http://wiki.answers.com/Q/How_do_you_change_the_headlights_of_a_94_Chrysler_LeBaron#ixzz19JuBNGBU
Repair Help & Product Troubleshooting for 1992 Chrysler Lebaron

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0073 seconds