Having problems with your 1994 Dodge Stealth ?
Changed brake pads on my 94 dodge stealth and now i can't get the brakes bled
If you have a soft brake pedal and have to push hard to slow down or pump the brakes to slow down then you probably have air in the brake lines from the last brake pad replacement. The brakes need to be bled with this method: Use 1/8 inch 2 foot long hose from parts store and attach the hose from bleeder valve ball on the brake caliper to a bottle partially filled with brake fluid. The end of the hose in the bottle must be submerged in the fluid in the bottle. With a second person holding the brake pedal to the floor, slowly turn bleeder valve counter clockwise (loosen tiny bit) with wrench and watch for dirty brake fluid to create bubbles in the bottle. When bubbles start, quickly tighten bleeder valve back to tight. Second person should lift foot, pump and then while valve is still tight should push the pedal to the floor again and THEN you again open bleeder valve slowly turning counter clockwise and watch for bubbles. Repeat until no more bubbles can be created in the bottle where the hose is submerged. Move to next caliper and repeat. For a firm brake pedal you will need to repeat this on all four calipers.
Repair Help & Product Troubleshooting for 1994 Dodge Stealth
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.