Having problems with your 1998 Dodge Durango ?

My rear wheel brakeline on durango 1998 blew

\015 Rear wheel brake line on 1998 blew. Can I replace myself?\015 Posted / edited by AnonymousUser on : 16-09-2019

Answers :

Depends on your mechanic ablilites. Steel brake line is basically 0.188 inch diameter line, and the metric 6mm line dia is very closely same.
\015\012Dodge uses ISO bubble flare , and not the American standard double flare at the end of the steel tube line. This ISO bubble flare on the steel line then fits into its mate female end which is the rubber hose connector end.
\015\012So, easiest way to get rid of the ISO bubble flare and change to American double flare end is:
\015\012Some automotive stores such as Parts Plus Auto Stores carry the brass brakeline adapter which has one end being the male end that fits nicely into the rubber hose with its ISO bubble female fitting, while the other end of the brass line adapter is the female end which has the double flare so you can then insert the steel line replacement with standard double flare into this end of the adapter.
\015\012Steel line , bungy brake line or equivalent is fine, and has the brake line nuts already on it, and is flared for you too. If you want to stay with ISO bubble line fittings you can get that in bungy brake line lengths too but it is less common for some stores to carry, and that is why the conversion brake line fitting adapter mentioned is so easy a way to change from ISO bubble flare to a double flare for easier use of all steel line being standard American double flared brake line. The brake lines come in straight lengths, 2ft 4ft, and 6ft, so you can use them to fit your necessary total length by connecting them with tubing couplers which the steel tube lines brake line nut gets threaded into.
\015\012My same year Durango had its rear line blow thru last year, due to the rusting of the steel brake line. I just got done last week, doing a entire steel line replacement myself. It was a medium sized effort for sure. You should check the other lines for the entire brake system to see if you need to replace more than just that section which failed for you, as my lines showed heavy corrosion at many other locations in the brake line system.
\015\012It is easy to double flare brake line tubing , and Sears sells its craftsman brand of brake line double flare tool kit for that purpose at about 60 bucks if I recall it right.
\015\012One thing you should do when doing your own double flaring, is to use a dial caliper to measure the diameter of the flare at its widest flared end, to insure you are within the required diameter of flare to insure proper sealing when you tighten down the tube flare nuts. I recall the flare diameter is supposed to be 0.272 inches , plus or minus 0.006 inches ( so range of dial caliper measuring of that formed flare should be between 0.266 inch and 0.278 inch) to insure the right diameter of flare for good sealing.
\015\012You can also get steel galvanized tubing line in coils of 20ft and more, with a bunch of brake line nuts ( all this is standard american brake line nuts, for double flared line fitting) from Inline Tube company; www.inlinetube.com.
\015\012Check out the great tech info from FEDHILL website, www.fedhillusa.com
\015\012Good luck, I did it so you can do it and feel satisfied and safe for the family with solid and sound steel line that is much better than chancing an accident via leaving the rusted line in place.
Repair Help & Product Troubleshooting for 1998 Dodge Durango

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0083 seconds