Having problems with your 2000 Ford F250 Super Duty Crew Cabs ?

I just installed the right head light on a 2000 f250. I'm trying to find the specifications on distance and height of the light beams, L &R when adjusting the lights.

Posted / edited by AnonymousUser on : 18-11-2019

Answers :

Headlamp Adjustment —Screen Method Aiming \015\012\015\012NOTE: Horizontal aim is not necessary for this vehicle and is not adjustable.
\015\012NOTE: Consult your state's vehicle inspection manual for recommended tolerance ranges for visual aiming.
\015\012
    \015\012
  1. \015\012NOTE: The sight shield may need to be positioned or removed for access to the adjusters.
    Before starting headlamp assembly adjustment:
  2. \015\012
      \015\012
    • Check the tire inflation.
    • \015\012
    • Check that no other load is in the vehicle other than a half tank of gas.
    • \015\012
    • Check that the headlamps are clean.
    • \015\012
    • Check for correct headlamp operation.
    • \015\012
    • Check that the vehicle is on level ground.
    • \015\012
    • If the vehicle is equipped with air suspension, make sure the switch is on.
    • \015\012
    • NOTE: The vertical wall or screen must be a minimum of 2.4 meters (8 feet) wide.
    \015\012
  3. Park the vehicle on a level surface approximately 7.6 meters (25 feet) from the vertical wall or screen directly in front of it.
  4. e4d4fd8.gif
\015\012
    \015\012NOTE: The center of the lamp is marked by a 3 mm (0.12 in) circle on the headlamp lens.
    Mark a horizontal reference line on the vertical wall or screen. \015\012
      \015\012
    1. Measure the center of the headlamp height to ground and record.
    \015\012
      \015\012
    1. Make a 2.4 meters (8 feet) horizontal mark (masking tape) on the vertical wall or screen at the same distance from the ground as previously recorded.
\015\012
\015\012d505709.gif\015\012
    \015\012
  1. \015\012NOTE: This procedure should be done in a dark environment to effectively see the headlamp beam pattern.
    Turn on the low beam headlamps to illuminate the wall or screen and open the hood.
\015\012
    \015\012
  1. \015\012NOTE: The appearance of the beam pattern may vary between vehicles.
    On the wall or screen, locate the high intensity area of the beam pattern.
\015\012
\015\0127ced4e6.gif\015\012NOTE: The appearance of the beam pattern may vary between vehicles.
\015\012Identify at the top edge of this high intensity area a distinct horizontal cutoff in the beam pattern. If the top edge of this cutoff is not even with the horizontal reference line, the headlamp beam will need to be adjusted.
\015\012
1fb716f.gif
Repair Help & Product Troubleshooting for 2000 Ford F250 Super Duty Crew Cabs

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0081 seconds