Having problems with your 2000 Oldsmobile Intrigue ?

How do i take out a alternator out of a 2000 oldsmobile intrigue

Posted / edited by AnonymousUser on : 25-05-2020

Answers :

The book tells you to take apart the suspension but who wants to do that so I will give you what I think is an easier version and Quick version.

\015\012
    \015\012
  1. Remove both cross braces (strut tower to the upper radiator core support).
  2. \015\012
  3. Remove air cleaner box and tube.
  4. \015\012
  5. Remove the upper engine torque mount bracket and remove it from the radiator core support.
  6. \015\012
  7. Remove the battery and the battery tray.
  8. \015\012
  9. Remove the radiator and condenser fan assembly.
  10. \015\012
  11. Remove the battery wires and clips from the alternator.
  12. \015\012
  13. Drain the overflow bottle.
  14. \015\012
  15. Remove the overflow bottle nuts and set it aside / to the back a bit.
  16. \015\012
  17. Remove the nut holding the fuse junction block and set it to the back a bit.
  18. \015\012
  19. Use a wire if you need to tie back the overflow and the fuse block out of the way of the belt.
  20. \015\012
  21. Use a ½ inch drive ratchet on the belt tenchoner and remove the serpentine belt.
  22. \015\012
  23. Alternator has 3 bolts 2 on the side of it or the front of the motor and one on the front of it / side of the motor.
  24. \015\012
  25. Remove the idler pulley next to the alternator this is bolt one.
  26. \015\012
  27. Loosen both side bolts don't remove yet.
  28. \015\012
  29. Messy part.
  30. \015\012
  31. Remove the water neck / thermostat housing and lower radiator hose.
  32. \015\012
  33. Alternator will not come out without taking this off.
  34. \015\012
  35. Pull it back out of the way.
  36. \015\012
  37. Finnish taking the front bolts out.
  38. \015\012
  39. You can now slide the alternator out to the side and up the battery area.
  40. \015\012
  41. It is tight but will come out.
  42. \015\012
  43. You should not have to replace the gasket on your thermostat housing.
  44. \015\012
  45. However be careful putting it back on do it evenly.
  46. \015\012
  47. 80 inch lbs (6.67ft lbs) to hold it on. It's not that much just good and snug.


IF you got that far you should be able to put it all back right.
Repair Help & Product Troubleshooting for 2000 Oldsmobile Intrigue

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0051 seconds