Having problems with your 2001 Honda Civic ?

Lug bolt on front drivers side wheel is broken & needs replaced. I'm doing the job.

Posted / edited by AnonymousUser on : 11-11-2019

Answers :

Safely jack and support the vehicle,remove wheel and tire assembly,with a punch and ball peen hammer (and safety glasses) or just a hammer,carefully knock broken stud out of the hub,it will fall out the back.Now take new stud and spin the hub until you find a spot where it will insert into the hole from the backside.Start the stud through the hole from the backside of the hub.Now at this point,you are going to PULL the stud into the hub,but the threads must be protected from galling.I use Anti Seize compound and some flat washers.Liberally coat the threads of the new stud with anti seize compound to protect the threads,stack some flat washers on the stud,install the lug nut,and tighten by hand.The stud will pull into the hub some.Remove lug nut,and stack more washers on the stud,and repeat the tightening process.Repeat process until stud is fully seated.Now remove anti seize compound with brake cleaner or equivalent solvent.Reinstall wheel and tire,and call this job completed.Remember to rate this solution.Good luck.
Repair Help & Product Troubleshooting for 2001 Honda Civic

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0090 seconds