Remove the cup that is around the door handle - should be srew(s).. And anything else that would prevent the panel from coming off..
\015\012Pop the panel off by prying it a bit.. There are plastic clips all around the edge of the panel that hold it on so be careful.. Usually a good yank will release each clip..

\015\012
1. remove screw and door handle trim \015\012
2. remove red reflector lense with a small screw driver it clips in \015\012
3. remove bolt from behind red reflector \015\012
4. remove bolt from door pull handle \015\012
5. Pull door panel off door \015\012
6. unhook wire harnesses tweeter, power door switch, power window switch.

\015\012The door panel is held on with clips that snap in it can be a pain in the but to get these off be careful pulling on the door pocket it can break. i just cautiously yanked on it and it popped off start in one corner and work from there the tweeter houseing is part of the door frame there is a special tool to release these plastic retainer clips, any parts store like NAPA will have it , well worth the money.