Having problems with your 2002 Honda Civic ?

2002 Civic Dx Clutch?

\015 My 02 civic dx i just bought with 123000 miles no idea if the clutch has ever been replaced but the clutch works fine but only for the last tenth of the full pedal... a better explanation i guess would be that i have to basically almost let my foot off the clutch before it seems to engage... but when it gets there it feels like a normal clutch... does the clutch cable need to be tightened or do i need a new clutch? please let me know if there's something i didn't explain well enough...thanks for your help.\015 Posted / edited by AnonymousUser on : 10-12-2018

Answers :

I have just replaced an 03 civic ex clutch and transmission bearings due to a customer being too harsh on it. It sounds like its got a little life left in it if you are easy on it. 

if there is adjustment in this model use the below walkthrough to adjust it.

adjust the clutch pedal, 

1. if you look up on the top of the clutch pedal, the first thing you should see if a clutch pedal position switch, and right behind it there is a locknut, looens the locknut. once you loosen it, back off on the pedal position switch or adjusting bolt untill it no longer touches the clutch pedal. 

2. now behind the clutch pedal, there is a pushrod. and on that pushrod, there is a locknut, loosen that locknut. Now turn the pushrod in or out to get the desired height and stroke at the clutch pedal. 

The freeplay is the amount of push on the clutch pedal to where is starts to have resistance from the top. I have usually been told it should be set at 1 1/2-2 inches of freeplay.

Once you set it, tighten the locknut on the pushrod. With the clutch pedal released, turn in the clutch pedal position switch untill it contacts the clutch pedal. then turn it an additional 3/4 to 1 turn. And tighten the locknut.

Now on top of the clutch pedal switch, there is a clutch interlock switch. Loosen the locknut on that switch. then press the clutch pedal to the floor.

release the clutch pedal 15-20 mm (0.59-0.79 in) from the fully pressed position, and hold it there. adjust the position of the clutch interlock switch so the engine will start with the clutch pedal in this position. then tighten the locknut on that switch.

Hope this helps 
Repair Help & Product Troubleshooting for 2002 Honda Civic

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0056 seconds