Having problems with your 2006 Hyundai Sonata ?

3rd brake lamp in '07 Hyundai Sonata

\015 Can you please tell me how to change out the 3rd(window) brake lamp in an 07 Sonata? The owners manual does not explain it & the dealership wants $51 to replace a $2 lamp!!!\015 Posted / edited by AnonymousUser on : 22-07-2019

Answers :

You need a philips screwdriver and a flashlight, and a telescoping magnet is recommended.

the best way to do this would be to empty your trunk, and lay in the trunk on your back with your legs hanging out and your flashlight pointed up at your work.
inside the trunk directly under the stoplamp you should see a connector, disconnect that and you should see a philips screw. remove the screw.
this part is a little tricky, shine the light up and to the left so that you can see the fastener that holds the bulb into the lamp. take your screwdriver, and place the tip on the flat part that sticks off of the bulb socket and press, so that you can turn it. once the socket is released, remove the bulb socket & bulb with its wire completely.
next, about 2-3 inches to the left of the rectangle where you removed the bulb & socket you should see a hole that is covered with a black foam. remove the foam from the hole, look straight up and you will see another philips screw. remove it, i recommend using a magnet to pull it from its hole after you've loosened it almost all the way, but whatever you do, do NOT do NOT drop that screw. it is almost impossible to retrieve and if you dont, it will rattle.
once you have both screws removed, get out of the trunk and go into the backseat and lift the 3rd brakelamp assembly off of the package tray; it may need a little negotiation, but be patient, it will come out.
once you have the stoplamp assembly out of the car, take the bulb socket, it should have a long flat tip at the bottom. take a pair of dikes and cut that tip completely off. replace the bulb, and install the bulb & socket into the lamp assembly, and re-install the lamp from inside the car, slowly and carefully slding it back into place. (hint, the more of the flat tip that you cut off, the easier it will slide into place).

once the lamp is back in place, hook up the connector, and re-install the screws, and you're done.
Hi have not done the sonata but if it is the high level brake lamp that is at the top of rear screen as like getz ? then the cover that covers the lamp ? is a push on/ pull off cover so grip cover on both ends and pull from screen you will see how clips hold cover when u come to refit ? if you only req bulb change ? it is a push/pull fit not bayonet! bulb is 16 watt if lamp req'd it is obviouse when you remove cover hope this helps?
Repair Help & Product Troubleshooting for 2006 Hyundai Sonata

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0084 seconds