Having problems with your 2008 Toyota Yaris Sedan ?

How to tune Toyota yaris Sedan

\015 Just got a 2006 toyota yaris sedan. The revolution after igniting the engine is at about 2000rpm. Need to know how to reduce the revolution? Thanks.\015 Posted / edited by AnonymousUser on : 22-10-2018

Answers :

Engine Tune up include three areas to be addressed in order to get most out of car and to comply with the recommended standards.
\0121. Fuel system.
\012- Inspect element air cleaner. Apparently if it seem to be in good condition, clean it with dry compressed air blowing from inside out. Replace it if found clogged. Always clean the element air cleaner immediately after driving through rainy or dusty area.
\012- Do the throttle body cleaning and and idle speed re-learning. Idle speed re-learning procedure is as under:
\012-- Make sure coolant level and engine oil level are up to the marks.
\012-- Remove the key or remote from the car. Remove the battery negative terminal for 5 Sec or more and re-connect.
\012-- Sit on a driver's seat. Close all the doors, gear in N or P, hand brake pulled. Switch off all the accessories like radio, DVD player, room light, blower motor, parking lights etc.
\012-- Start the engine and hold the throttle at 3000 rpm till the radiator fan becomes on. After the fan becomes on, release the throttle and let the engine at idle for eight minutes.
\012-- Switch off the engine and wait 5 Sec. Start the engine and the idle speed learning is complete.
\012-- Now learn the body ecm. Switch on the ignition lower the driver's window, hold it for 3 Sec then release the button. Lift up the window, keep the button pressed for 3 Sec, after the window reaches top, and release.
\012-- Do the same procedure with all the remaining windows while sitting in front of the individual windows.
\0122. Ignition system:
\012- Remove all the spark plugs and visually inspect them for deterioration of the electrodes. any cracks on porcelain, and color to get an idea for the engine condition. If the color of the electrodes are brown, clean and dry, the engine and performance is excellent. If black and dry, it shows excessive fuel consumption due to the low pressure of fuel pump, clogged element air cleaner, intake blockade, throttle body clogged, faulty MAF sensor, faulty heated Oxygen sensor and defective or leaking fuel injectors. If white color, the system is lean or the fuel is water contaminated. If oily and black, it reveals the oil is getting into the engine through some external source or engine failure.
\012- Adjust the spark plug electrode gap to 1.00 - 1.1 mm.
\012- Inspect the ignitors and connectors for firm and good appearance.
\0123. Engine compression system:
\012Check the compression of each cylinder with the help of cylinder compression gauge. If the cylinder compression is found less than the specified, it could by due to valve clearance too low or the engine valves and guides are gone bad. Or it may be due to the worn out piston and rings.
\012Valve clearance (cold):
\012for intake:
\0120.15 to 0.25 mm (0.006 to 0.010 in.)
\012for exhaust:
\0120.25 to 0.35 mm (0.010 to 0.014 in.)
Its all computer controlled,try disconnecting the battery for a few minutes and see if that helps
Repair Help & Product Troubleshooting for 2008 Toyota Yaris Sedan

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0095 seconds