Having problems with your Saturn L-Series ?

Saturn lw2 stuck in limp mode

\015 DTC P 1779 P1791 P0123 P0222\015 Posted / edited by AnonymousUser on : 18-03-2019

Answers :

Hi there:DTC P1779 - Engine Torque Delivered to TCM Signal
Engine torque signal below lower limit delivered to TCM. I've read these occur when there is a communication problem between ECM and TCM (Transmission Control Module).
DTC P1791 - Transmission Control Module LoopThe P1779 and P1791 codes set as a result of the other DTC (P0128). When the ECM sets certain trouble codes, these codes will set in the TCM (Transmission Control Module). The TCM will also increase tranmission pressures, which results in the harsh shifting.

DTC P0123 - Throttle/Pedal Position Sensor/Switch "A" Circuit HighTP sensor signal circuit is shorted to sensor ground. TP sensor signal circuit is open (except 1996-1998 models). TP sensor VREF circuit is open between sensor and PCM. TP sensor is damaged or it failed (it may be shorted).

DTC P0222 - Throttle/Pedal Position Sensor/Switch "B" Circuit LowThe Throttle control module contains two throttle position (TP) sensors with a common 5 volt supply, a common ground, and two independent signal circuits that vary resistance according to changes in throttle plate position. The ECM measures the signal voltage from each TP sensor, which is a reduced value of the ECM 5 volt reference. As the throttle plate opens from 0% throttle to wide open throttle, the voltage on the TP sensor 1 signal increases from 0.6 (+/-0.2) volts to 4.3 (+/-0.2) volts, while the voltage on the TP sensor 2 signal decreases from 4.4 (+/-0.2) volts to 0.76 (+/-0.2) volts.

If both P0122 and P0222 are set, circuit 486 may be either open or shorted to ground.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
Repair Help & Product Troubleshooting for Saturn L-Series

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0087 seconds